|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Bulletin PD-2.289 rev. D 03/02 11DQ09 11DQ10 SCHOTTKY RECTIFIER 1.1 Amp Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM IFSM @ tp = 5 s sine VF TJ @ 1 Apk, TJ = 25C range Description/Features Units A V A V C The 11DQ.. axial leaded Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. Low profile, axial leaded outline High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability 11DQ.. 1.1 90 / 100 85 0.85 - 40 to 150 CASE STYLE AND DIMENSIONS Conform to JEDEC Outline DO-204AL (DO-41) Dimensions in millimeters and inches www.irf.com 1 11DQ09, 11DQ10 Bulletin PD-2.289 rev. D 03/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 11DQ09 90 11DQ10 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 4 IFSM EAS IAR Max.PeakOneCycleNon-Repetitive Surge Current * See Fig. 6 Non-Repetitive Avalanche Energy Repetitive Avalanche Current 85 14 3.0 0.2 A mJ A 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied 11DQ.. 1.1 Units A Conditions 50% duty cycle @ TC = 75C, rectangular wave form TJ = 25 C, IAS = 0.5 Amps, L = 10 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) 11DQ.. Units 0.85 0.96 0.68 0.78 0.5 1.0 35 8.0 10000 V V V V mA mA pF nH V/s @ 1A @ 2A @ 1A @ 2A Conditions TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current * See Fig. 2 Typical Series Inductance (1) Typical Junction Capacitance TJ = 25 C TJ = 125 C VR = 5VDC (test signal range 100Khz to 1Mhz) 25C Measured lead to lead 5mm from package body (Rated VR) dv/dt Max. Voltage Rate of Change (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range (*) Max. Storage Temperature Range 11DQ.. Units -40 to 150 -40 to 150 100 81 C C Conditions RthJA Max. Thermal Resistance Junction to Ambient RthJL Typical Thermal Resistance Junction to Lead wt Approximate Weight Case Style (*) dPtot dTj < 1 Rth( j-a) C/W DC operation Without cooling fin C/W DC operation (See Fig. 4) 0.33(0.012) g (oz.) DO-204AL(DO-41) thermal runaway condition for a diode on its own heatsink 2 www.irf.com 11DQ09, 11DQ10 Bulletin PD-2.289 rev. D 03/02 10 1 Reverse Current - IR (mA) T J = 150C 10 0.1 125C 0.01 0.001 25C 0.0001 0 0 20 40 60 80 100 Instantaneous Forward Current - IF (A) TJ = 150C TJ = 125C Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 1 TJ = 25C 100 Junction Capacitance - CT (pF) T = 25C J 0.1 0 0.4 0.8 1.2 1.6 10 Forward Voltage Drop - VFM (V) Fig. 1 - Max. Forward Voltage Drop Characteristics 0 20 40 60 80 100 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage www.irf.com 3 11DQ09, 11DQ10 Bulletin PD-2.289 rev. D 03/02 150 Allowable Case Temperature - (C) Average Power Loss - (Watts) 0.8 120 DC 0.6 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit DC 90 60 0.4 Square wave (D = 0.50) 80% Rated V applied R 30 see note (2) 0.2 0 0 0.3 0.6 0.9 1.2 1.5 Average Forward Current - IF(AV)(A) Fig. 4 - Max. Allowable Case Temperature Vs. Average Forward Current 0 0 0.3 0.6 0.9 1.2 1.5 Average Forward Current - IF(AV) (A) Fig. 5- Forward Power Loss Characteristics 10 Non-Repetitive Surge Current - IFSM (A) 1 0.1 T J = 150C 125C 0.01 0.001 25C 0.0001 0 0 20 40 60 80 100 Square Wave Pulse Duration - tp (microsec) Fig. 6 - Max. Non-Repetitive Surge Current (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 11DQ09, 11DQ10 Bulletin PD-2.289 rev. D 03/02 Ordering Information Table Device Code 11 1 D 2 Q 3 10 4 TR 5 1 2 3 4 5 - 11 = 1.1A (Axial and small packages - Current is x10) D = DO-41 package Q = Schottky Q.. Series 10 = Voltage Ratings TR = Tape & Reel package ( 5000 pcs) = Box package (1000 pcs) 10 = 100V 09 = 90V Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/02 www.irf.com 5 |
Price & Availability of 11DQ10 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |